• Shaking Table

    Shaking Table is also called 6S Shaking Table, Concentrating Tables,Gravity Shaker and wilfley shaking table.
    Concentrating Tables are designed to wet gravity-based separation of minerals and other granular materials.
    There are many applications where the concentrating table is of particular value and cannot be equaled for economical and efficient performance. They are effective in processing precious and base metal, rare metal and non-metallic minerals.
    The Shaking Tables have three distinct deck designs available. The course ore deck is designed for recovering particles sized from 0.5 mm to 2 mm; the fine sand deck is designed for recovering fine particles in the range of 0.074 mm to 0.5 mm; the slime deck is designed for recovering super extremely fine particles in the range of 0.05 mm to 0.074 mm

Construction Of Shaking Table:

Head Motion:The head motion is of rugged construction and requires minimum maintenance. Its internal mechanism is splash lubricated from an integral oil sump.
Decks :The decks are built of 16 mm zircon-reinforced fiberglass with fabricated steel frames at the bottom and are easy to clean, requiring little maintenance. The specific gravity of fiberglass made into decks is one third of that of steel, while its strength reaches as high as 70% that of steel. This fiberglass desks also has the characteristic of water-resistance and corrosion-resistance and can hold the shape unchangeable at ±50℃.
Feed and Water Box :A wooden feed distributing box with hopper and a long water box are attached to the iron of the deck, giving a very even distribution of feed and water.
Base:A choice of ordinary type, groove steel support or big channel steel support is available.

  6-S Shaking table (Ordinary type)
  6-S Shaking table (groove steel bracket)
    The table (groove steel bracket) has the same effect as the ordinary support. It has the following characteristic: it does not need the cement to bury the foot bolt in advance, installs and uses quickly, is easy to disassemble, may move, and the cost is relatively inexpensive.
  6-S Shaking table  (Big channel steel support)
      The 6S table (big channel steel support) has the same effect as the ordinary support. It has the following characteristic: it does not need the cement to bury the foot bolt in advance, installs and uses quickly, is easy to disassemble, and may move. Is suitable specially for in the surface uneven, not the solid sand and the empty superficial work. Specially it's suitable for work in the surface which is uneven, void ,and not the solid sand.
Technical Parameter:
Name Unit Coarse Sand Table Fine Sand Table Slimer
Table Size Length mm 4450 4450
Driving Part Width mm 1855 1855
Concentrating End Width mm 1546 1546
Max Feed Size mm 2 0.5 0.15
 Capacity T/d 30-60 10-20 15-25
Feeding Concentration % 25-30 20-25 15-25
Distance mm 16-22 11-16 8-16
Frequency F 15-48 48-53 50-57
Table-board
Water Quantity
T/d 80-150 30-60 10-17
Transverse Slope   2.5-4.5 1.5-3.5 1-2
Longitudinal Gradient % 1.4 0.92 ----
Table-Board Tip
Extinguish Angle
  32-42 40 42
Beneficiation Area ---- 7.6 7.6 7.6
Table-Board
Length Ratio
---- 2.6 2.6 2.6
Motor Power Kw 1.1 1.1 1.1
 

Inquiry DaiWo
If you are interested in these products, please leave your message,then,the relevent staff will contact you quickly . (Note: Please fill in your correct information)! Please send all your requests and proposals to sales@daiwomining.com.
Name:
Tel:
Country:
Email:
 
Whatsapp:
 
Inquiry:
 
Time: